ASSEMBLY HELP

Our enclosures are designed to be easy to assemble at home.

They arrive as flatpacks with large panels, and most of the work is already done for you. The wire mesh is pre-attached to the frame, and the timber is already stained, so you’re mainly just lining up the panels and screwing them together.

All screws and instructions are included. You’ll just need a drill or battery-powered screwdriver with a Phillips head bit to complete most assemblies.

Assembly time depends on the size of the enclosure, your experience level, and whether you have someone helping you.

As a general guide, smaller hutches and kennels usually take around 1 hour to assemble, while larger walk-in enclosures can take up to 3 hours.

You won’t need to drill any holes into the timber.

When joining two panels, the first panel includes a guide hole to show you exactly where the screw should go. The second panel does not have a pre-drilled hole, so the screw goes directly into the wood. This helps create a strong, secure join between the panels.